Wireless. This page lists the Wi-Fi configuration section of the physical radio. You can configure the Wi-Fi hotspot and the Wi-Fi relay.
radio0is corresponding to the wireless modem on the router
SSID | Mode:
Masteris the primary Wi-Fi hotspot
SSID | Mode:
Clientis the Wi-Fi relay network
Associated stationsindicate the active Wi-Fi networks and its working status
Editbutton on the second row of
SSID | Mode: Masterto enter the configure section of the primary Wi-Fi hotspot.
Device Configuration, in the tab
General Setup, you can monitor the network
Statusand configure Wi-Fi operating
Device Configuration, in the tab of
Advanced Settings, go to
Country Codefield, and select the correct country code. It is essential to ensure the Wi-Fi hotspot on your router meets the legal regulations in your country. The other configured Wi-Fi networks will use the same device settings.
Interface Configuration, in the tab
General Setup, you can edit the name of Wi-Fi hotspot on the field
Wireless Securityto enter the encryption section and configure the Wi-Fi password.
Encryption: Select an encryption method. e.g.,
WPA2-PSKis recommended for home and small office networks.
Keyis the Wi-Fi password, which is a secret phrase that clients must use to connect to your Wi-Fi network. With
WPA2-PSKencryption, the Key must be at least eight characters.
Hide ESSID, and the router will stop broadcast the Wi-Fi hotspot but remain the Wi-Fi connection when entering the Wi-Fi hotspot name and password manually.
WMM, Wi-Fi Multimedia, is an automated way of handling Quality of Service (QoS) on the Wi-Fi network that provides improved video and voice performance over the wireless network.
Scanbutton on the first row of
radio0. The router starts scans the nearby 2.4GHz Wi-Fi hotspots.
Name of the new networkas
wwan, and select
Submitbutton on the bottom right corner to enter the Wi-Fi client configure page, set other things as needed. The most important settings are on the row of Operating Frequency.
Save & Applybutton on the bottom right corner to apply the new configurations.