4.1 Login Router

Here is an introduction of how to log in EZR33L router's admin panel.

After connecting to PoE power (step 2.3.7), the EZR33L router will take 2~3 minutes to boot up. We can use a phone or computer to join its open Wi-Fi hotspot "Outdoor-WiFi-xxx" or connect the computer to the Ethernet (step 2.3.8).

After connected with Wi-Fi or Ethernet, open a web browser, enter the router IP šŸ”— http://192.168.30.1 on the address bar.

The default setting has no password. Click the "Login" button to access the router's admin panel.

If unable to access, please check the Wi-Fi or Ethernet connection. Make sure the phone or computer has turned on DHCP mode. If you use a static IP address, please refer to the guide on step 4.5.1.

On some computers, we need to clean the cache of the web browser.

The default URL prefix is http:// instead of https://.

The default Wi-Fi hotspot has no password. You can change the Wi-Fi SSID and encrypt it by referring to step 4.3.2.

The default router admin has no password either. You can change the router password by referring to step 4.2.

Last updated